Page 366

U.S. Notes (con.) (18) Fabrics of man-made micro-denier fibers impregnated, coated, covered, or laminated with polyurethane, of a width of at least 135 cm but no more than 150 cm, weighing at least 206 g/m 2 but not more than 500 g/m 2 (described in statistical reporting number 5903.20.2500) (19) Long pile knit fabrics, of acrylic pile on polyester ground, valued not over $16 per m 2 (described in statistical reporting number 6001.10.2000) (20) Cement backer boards (CAS No. 1309-48-4) (described in statistical reporting number 6810.99.0080) (21) Tiles of non-recycled glass on a vinyl mesh backing, in a grid pattern of not less than 304 mm by 304 mm and not exceeding 305 mm by 305 mm, for mosaics or other decorative or construction purposes (described in statistical reporting number 7016.10.0000) (22) Microscope slides, each 25 mm by 76 mm, with a 25 mm by 25 mm area coated in printable paint (described in statistical reporting number 7017.90.1000) (23) Articulated chains of iron, not over 8 mm in thickness and valued not over $2 per m (described in statistical reporting number 7315.12.0080) (24) Bolts of alloy steel other than stainless steel, with shanks or threads with a diameter of 6 mm or more, valued not over $0.05 per piece (described in statistical reporting number 7318.15.8069) (25) Perforated hollow hex head bolts (“banjo bolts”) of steel other than stainless, with shanks or threads with a diameter of 6 mm or more, valued not over $0.07 per piece (described in statistical reporting number 7318.15.8069) (26) Kerosene air heaters, each incorporating a motor-driven fan or blower, each valued at $70 or more but not exceeding $300 (described in statistical reporting number 7322.90.0015) (27) Freestanding cast iron bathtubs, without feet, coated with porcelain enamel, each valued over $275 (described in statistical reporting number 7324.21.5000) (28) Stamped steel rings, measuring 1.22 mm in thickness and 35 mm in diameter, of a kind used with rubber vibration bushings in motor vehicle suspensions (described in statistical reporting number 7326.19.0080) (29) Portable work table bases (described in statistical reporting number 7326.90.8688) (30) Sawhorses of steel, with folding legs, each with a weight capacity of at least 225 kg but not more than 685 kg (described in statistical reporting number 7326.90.8688) (31) Decorative copper cup rainfall funnels, each weighing not more than 1.5 kg with a chain measuring 20 cm in length, cups each measuring 80 cm in height, 10 cm in width, 10 cm in diameter (described in statistical reporting number 7419.99.5050) (32) Nickel hydroxy carbonate (CAS No. 12607-70-4) (described in statistical reporting number 7501.20.0000) (33) Aluminum desktop stands for laptop computers (described in statistical reporting number 7616.99.5190) (34) Extension wrenches (described in statistical reporting number 8204.11.0060) (35) Parallel clamps with jaws not more than 10 cm wide (described in statistical reporting number 8205.70.0090) (36) Drill bits of steel, consisting of three legs that are welded together with each leg containing rotating cones, for use in drilling for oil and natural gas (described in statistical reporting number 8207.19.3060) (37) Cylindrical cemented tungsten carbide rod blanks, containing by weight 60 percent or more of tungsten carbide, 30 percent or less of cobalt, and 15 percent or less of nickel (described in statistical reporting number 8209.00.0030) (38) Brake pad clips, of stainless steel, for motor vehicles of headings 8703 and 8704 (described in statistical reporting number 8302.30.3060) (39) Fifteen-door refrigerated lockers designed to convey pre-ordered groceries to consumers, measuring not over 80 cm in depth by 230 cm in length by 35 cm in height (described in statistical reporting number 8418.50.0080) Harmonized Tariff Schedule of the United States Revision 15 (2026) Annotated for Statistical Reporting Purposes XXII 99 - III - 194