Page 310

U.S. Notes (con.) (3) Expandable plastics beads, 0.30 to 0.50 mm in diameter, consisting of copolymers of methylmethacrylate (62 to 64 percent by weight) and styrene (26 to 28 percent by weight) (described in statistical reporting number 3906.90.2000) (4) Polyol blends containing 92 percent or more by weight of polyether polyol (CAS number 9049-71-2) and 2.5 [percent] or more by weight of N,N-dimethylcyclohexamine (described in statistical reporting number 3907.20.0000) (5) Hot melt flat shapes of biaxially oriented polypropylene (BOPP) film with an acrylic emulsion (described in statistical reporting number 3919.90.5060) (6) Polyethylene film, 20.32 to 198.12 cm in width, and 30.5 to 2000.5 m in length, coated on one side with solvent acrylic adhesive, clear or in transparent colors, whether or not printed, in rolls (described in statistical reporting number 3919.90.5060) (7) Polyvinyl chloride film, coated on one side with pressure sensitive solvent-acrylic adhesive that allows for easy removal from a flat glass or flat, rigid, clear plastics surface, 106.7 cm, 137.2 cm or 152.4 cm in width, and 30.38 m or 49.99 m in length, with regular perforations measuring 1.5 to 1.6 mm in diameter, where the perforations cover 30, 40 or 50 percent of the surface area (described in statistical reporting number 3919.90.5060) (8) Printed rectangular polyethylene sheets depicting images on one side, with self-adhesive edges protected with peel-off liners on the other side, measuring 30.5 cm by 45.7 cm or 30.5 cm by 25.4 cm (described in statistical reporting number 3919.90.5060) (9) Self-adhesive colored or printed polyvinyl chloride film with a peelable liner, in rolls, measuring 30.5 cm or 50.8 cm in width and 3.05 m to 6.10 m in length, of a kind used for lining shelves or drawers (described in statistical reporting number 3919.90.5060) (10) Printed, nonpermeable plastic film of ethylene designed for use in packaging personal care products such as baby wipes, adult wipes and similar wet stack products (provided for in statistical reporting number 3920.10.0000) (11) Polyethylene film of a kind used for wrapping perishable foods, in rolls measuring 30.5 cm in width and up to 76.2 m in length, with a starter edge tab, put up in retail packages incorporating a built-in slide cutter and grip strip for holding the film in place until subsequent use (described in statistical reporting number 3920.10.0000) (12) Rectangular sheets of high-density or low-density polyethylene, 111.75 cm to 215.9 cm in width, and 152.4 cm to 304.8 cm in length, with a sticker attached to mark the center of each sheet, of a kind used in hospital or surgery center operating rooms (described in statistical reporting number 3920.10.0000) (13) Spark-ignition rotary or reciprocating internal combustion piston engines to be installed in agricultural or horticultural machinery or equipment, 4,476 W or more but not more than 37.6 kW, each valued not over $180 (described in statistical reporting number 8407.90.1020) (14) Gas (natural or liquid propane (LP)) engines each having a displacement of more than 2 liters but not more than 2.5 liters (described in statistical reporting number 8407.90.9010) (15) Spark-ignition internal combustion piston engines, not elsewhere specified or included, 746 W or greater but not exceeding 4,476 W, with an engine displacement of not more than 430 cc (described in statistical reporting number 8407.90.9040) (16) Heat guns (described in statistical reporting number 8419.89.9585) (17) Heated tissue preparation microscope slide flattening tables (described in statistical reporting number 8419.89.9585) (18) Tissue sample paraffin floatation baths (described in statistical reporting number 8419.89.9585) (19) Air amplifiers powered solely by an external source of compressed air, which is routed through the apparatus in such a manner as to draw in ambient air, increase its speed and direct the air through an output port, each such apparatus not exceeding 1 kg in weight (described in statistical reporting number 8424.89.9000) (20) Apparatus capable of generating and projecting liquid particles of a size that simulates haze, fog or snow (depending on the composition of the liquid or powdered source), whether or not incorporating laser or other lighting apparatus (described in statistical reporting number 8424.89.9000) (21) Apparatus capable of mechanically generating and projecting bubbles from a liquid source, each apparatus weighing more than 2.5 kg but not more than 6.5 kg (described in statistical reporting number 8424.89.9000) Harmonized Tariff Schedule of the United States Revision 15 (2026) Annotated for Statistical Reporting Purposes XXII 99 - III - 138